The electric motor of the accumulator frame : 55KWįorming & Sizing Mill adopts roller type forming principle and high-frequency induction welding. It can carry the strip steel to shape system and send the carry out material velocity information to electric control device.Īdvantage:storage more material,no strike to strip steel surfaceĬarry material going velocity:Vmax=120m/minĭirectly electric motor power of the press & carry:30KW Send-off material device: include frame, guide direction rolls, guide out roll of high or lower place. It can be used to storage the strip steel material from press& carry unit and it could be draw from the center send-off material roll. It is main include frame, electric motor, brake unit, circling direction transfer power axle of the reduce velocity, press & carry roll, pressure air system of guide roll, inspected velocity unit it can supply the strip steel to accumulator and the mean times it will transfer the carry velocity information to electric control system, when we demand stop carry the material to this unit, it will stop roll to the electric motor and press& carry material roll by the break, and also could adjust the velocity to carry electric motor and the unit carry material velocity.Īccumulator frame assemble: include the electric motor, frame, inner circle roll, out circle roll and pressure roll. This unit is main include in press& carry material device, accumulator assemble, carry off material unit, electric control unit. Shear and welder is used to cut the irregular ends of the strips and then connect the strips by welding. The leveling unit with 2 roll pinch and 5 roll leveling. This unit is main used to lead the new coil steel head feed into the flattener unit ter uncoiler unit bring the coil into the working place.
Forming speed:75X45-80m/min；100X100-60m/minĦm wide, 100m long, at least 5m high from Ceiling Rails to Ground.Ĭoil Loading → Uncoiling →Cutting and Welding →Horizontal Spiral Accumulator → Forming, HF welding, Deburring, Cooling, Sizing, Straightening →cutting saw → Packing → Storage.Mechanical properties: σb≤520Mpa,σs≤365MPa Material : Low carbon steel and low alloy constructional steel Adopting roll pass design, the production line can manufacture welded steel pipes with good quality machining and high precision assembling. CHIL-QUIK CP-127 adhesive is versatile, being able to be applied in a wide variety of methods, including automatic coil lines and roll coaters to help reduce inventory requirements.HG127 High-Frequency Welded Pipe Production Line is designed to produce welded round pipes of Ф40～127mm in diameter and 1.5～4.5mm in wall thickness as well as 40×40-100×100mm square pipes with thickness from 1.5-4.5mm and deformed pipes of the corresponding size.It can be applied to edges by brush, spray or dipping. May be used to seal or butter cut edges of duct liner insulation to retard fiber release.The bond created between insulation and jacketing/substrate is strong, which helps prevent delamination to provide a longer service life.Since CHIL-QUIK CP-127 adhesive exhibits good tack, insulation can be immediately pressed into place, which results in high production rates.Because it dries clear, overspray is not objectionable.CHIL-QUIK CP-127 adhesive is water based for personnel safety it contains no solvents, and presents no fire hazard during application.It adheres rigid board stock insulations to the interior/exterior surface of galvanized steel and/or aluminum metal ductwork prior to final securement.Seals edges of duct liner insulation to prevent fiber release. It adheres vapor barrier jacketing and facing materials, such as Foil Faced Kraft paper laminates (FSK) and All Service Jacketing (ASJ), to insulation. International Services & Global SolutionsĬHIL-QUIK CP-127 adhesive is used in conjunction with low-density glass fiber and mineral fiber insulations.
Air/Vapor Barriers & Waterproofing Systems.
0 kommentar(er)
